Valiant RS201 Remote Starter

I have 1990 camry that I want to install a Valiant rs201 remote starter. I do not have the wiring diagram. On the back of the unit are the wire locations, but some I do not know where or if to use them. The ones with the asterisk in front are the ones I need help with. There is no alarm on the vehicle. This is what it says: BLACK:   SYSTEM GROUND *BROWN: SENSOR BYPASS TO SENSOR TRIGGER WIRE *BLUE: SENSOR BYPASS TO ALARM SENSOR TRIGGER WIRE *GRAY: GROUND OUT WHEN REMOTE STARTER ACTIVE WHITE: BRAKE INPUT POSITIVE BLUE/WHITE: HOOD PIN SWITCH NEGATIVE *ORANGE: RECEIVER INPUT NEGATIVE *GREEN: VACUUM INPUT NRGATIVE (N.C. VACUUM LOOP MUST BE CUT ) YELLOW: +12V OUT TO PARKING LIGHT PURPLE: +12V OUT TO STARTER ORANGE: +12V OUT TO ACC. YELLOW: +12V OUT TO IGNITION RED: MAIN POWER INPUT +12V Any help would be appreciated. Thanks Rich p.s. the valiant RS201 is made by IC Dynamics.