98 nissan altima GLE alarm

Home / the12volt's Install Bay / Car Security and Convenience / 98 nissan altima GLE alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

azn02civic

Member - Posts: 5

Joined: April 05, 2004

Location: United States

Posted: February 03, 2005 at 12:40 PM / IP Logged

hey i have a question reqarding this car alarm system. (98 nissan altima GLE) the remote is lost and i need to know how to reprogrammed the new one. I looked at ebay and found some but dont no if it is the right one. and i found the wiring diagram but is there another one if the car have a keyless entry and alarm. any help would be helpful. Thanks!!!

Back to Top

jaurora

Silver - Posts: 429

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 16, 2004

Location: United States

Posted: February 03, 2005 at 2:58 PM / IP Logged

That is for the dealership if it is a factory system!

MECP certified (If it really means anything)

Jeremy

Back to Top

azn02civic

Member - Posts: 5

Joined: April 05, 2004

Location: United States

Posted: February 04, 2005 at 11:44 AM / IP Logged

Any one know how to program the new remote control for this car Please help!!!

Back to Top

jaurora

Silver - Posts: 429

Joined: January 16, 2004

Location: United States

Posted: February 04, 2005 at 11:57 AM / IP Logged

Like I said,

If it is an aftermarket we can help, if it is factory you need to go to the dealer or check your car manual.

MECP certified (If it really means anything)

Jeremy

Back to Top

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: February 04, 2005 at 11:39 PM / IP Logged

Here are the instructions for 1995-1998 Max:

Enter the vehicle, close and lock all doors. Insert and remove key from

ignition 6 times within 10 seconds. Tail Lamps will flash to indicate

original code has been erased. Turn ignition to the ACC position. Press

LOCK button on 1st transmitter. Tail Lamps will flash to confirm

programming. To enter additional transmitters, unlock then lock the doors

using the power switch located on the driver door. Press LOCK button on

the additional transmitter (up to 4 transmiters total possible). tail

lamps will flash to confirm programming. Open drivers door, turn ignition

to OFF.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 nissan altima GLE alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.