Ultra Start TL1250M Car Starter Help

I have a 2000 honda civic ex 4 door sedan and I would like to get all the help i can installing this item.  I'm very familiar with car stereo products but I have never installed a car starter especially a car starter for a manual transmission vehicle.  Any and All help I can get would be excellent.

Why is it unsafe?  I did one a couple weeks ago with absolutely no problems.  Please fill me in.

why is it unsafe?  Do I need any relays?

This unit is made for manual tranny vehicles, you will need to go through a sequence in order for the RS to operate everytime you exit the vehicle. Here is a wiring diagram for the car:

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|white               |+  |ignition harness            ||          STARTER|BLACK/ white         |+  |ignition harness or *1      ||         IGNITION|BLACK / YELLOW        |+  |ignition harness            ||  SECOND IGNITION|yellow              |+  |ignition harness            ||        ACCESSORY|WHITE/ black         |+  |ignition harness            ||       POWER LOCK|GREEN / WHITE         |-  |keyless entry module *2     ||     POWER UNLOCK|GREEN/ orange        |-  |keyless entry module *2     ||       LOCK MOTOR|WHITE/ red           |   |drivers kick panel          ||     UNLOCK MOTOR|blue/red            |   |drivers kick panel          ||    DISARM DEFEAT|yellow/red          |   |keyless entry module *2     || PARKING LIGHTS +|RED / black           |   |keyless entry module *2     ||       HEADLIGHTS|                    |   |                            ||     DOOR TRIGGER|lt. GREEN/ red       |-  |OEM alarm plug *3           || DOME SUPERVISION|same as doors       |   |                            ||  TRUNK/HATCH PIN|blue/black          |-  |OEM alarm plug *3           ||       TACHOMETER|blue                |   |test connector *4           ||      SPEED SENSE|                    |   |                            ||       BRAKE WIRE|GREEN / WHITE         |+  |brake switch                ||     HORN TRIGGER|gray                |-  |OEM alarm plug *3           ||           WIPERS|                    |   |                            ||  LF WINDOW UP/DN|RED / yel - RED / blu   |A  |drivers door switch         ||  RF WINDOW UP/DN|blu/yel - blu/org   |A  |drivers kick panel          ||  LR WINDOW UP/DN|grn/yel - green     |A  |drivers kick panel          ||  RR WINDOW UP/DN|yellow - yel/grn    |A  |drivers kick panel          |

Notes:

*1  In 6 pin white plug behind fuse box  *2 The keyless entry module is white in color, and located in the drivers kick panel.  *3 The OEM alarm plug is to the right side of the steering column.  The plug is green.  *4 Drivers side fire wall under hood in a 2 pin plug

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

in the installation guide it says that every thing gets connected but the re-arm, trunk release, factory disarm, (-) when running/armed, and (-) horn honk.  The quick start install steps say to connect everything else except those.  Why is that? Also There are 2 12power input wires and I only have 1 constant 12V+ do I wire both to that single wire? Do I use Ignition2 for the selectable output "jumper"  The Ignition2 wire and the accessory wires are both yellow are those 2 supposed to be wired together.  Do I need any relays?