2002 Honda S2000 clutch bypass

does anyone know how to bypass the clutch for remote start? there is a plug on the front of the clutch closer to the driver that goes into a switch. i tried to test it and it's not the right switch. when the switch is release (clutched push in a little bit), the car still does not start. it needs to be pushed in all the way.

i know how to bypass it.. i just have a problem finding the switch/wires

havent done one of these but its still a Honda. dont get confuse w/ teh cruise control switch. might want to look a bit further up.Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

i found it. it's a switch ABOVE the cruise control switch. i kept looking for something against the firewall. i found myself a better light. i got one of those LED headlamps and i saw it hiding above.

this is an interesting tip for an s2k remote start installer... if you use the WHITE/ black starter wire in the kick panel, you don't need to bypass the clutch during remote start. this will save some time since this wire is easier to reach and one less step is required. however, i have a feeling if you use the wire at the starter button, you will have to bypass the starter.

and the clutch switch is not at the firewall, its b4 the pedal and near the DPK.Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

you can get a BLACK/ white wire that goes into a relay in the dkp. you can use that wire to by pass the clutch use you negative output to actived the factory relay.how own your mind, control your life.

MECP certified. always use a DMM