remote start won't work when cold

Home / the12volt's Install Bay / Car Security and Convenience / remote start won't work when cold (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wblakes

Copper - Posts: 202

Joined: February 03, 2004

Location: United States

Posted: February 07, 2005 at 8:41 PM / IP Logged

i installed a viper 791vx into my brothers 2001 lexus rx300 two months ago. everything was working perfectly until after a visit to the lexus dealer for some repair. now the car won't remote start when it is cold. it would start fine when it is still hot. if i let the car sit for more then two hours, it won't remote start. i already relearn the tach and it didn't help. i don't think is an immobilizer problem because it starts when the car is hot. any other suggestions??????

jcap

Member - Posts: 41

Joined: May 14, 2004

Location: Canada

Posted: February 07, 2005 at 11:21 PM / IP Logged

try to relearn the tach signal with the vec in drive . note set park brake and step on brake at the same time.

jcap

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start won't work when cold

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.