Disarm factory alarm

Home / the12volt's Install Bay / Car Security and Convenience / Disarm factory alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sonnychile

Member - Posts: 1

Joined: February 03, 2004

Location: United States

Posted: February 10, 2005 at 6:38 AM / IP Logged

I am installing a remote starter for a Toyota Camry 2003. Everything works just fine, I can only remote start the vehicle with the factory alarm in disarm mode. But when I lock the door with the key fob/arm, It wouldn't let me remote start the vehicle. Can someone help me to disarm while remote start the car with the doors lock.

I have tried to connect an output (-) pulse from the remote starter to a key sense wire (blue, from ignition harness), but this does not disarm the factory alarm. I have also used a bypass module in conjunction with the key sense wire.

Thanks

Sonny

Back to Top

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: February 10, 2005 at 8:37 AM / IP Logged

What you need to do is look for a function on your remote starter that will do the following.

Unlock the doors, on your particular car the factory alarm will disarm with unlock. It will then Start the car. Once the car starts running, 3 seconds later it will then locks and arm the car up.

It sometime has a fancy term like SMART START, SMART LOCK, SECURE LOCK...Anyways, the term just does the function I mention above. If you can't find it, just tell us the model of remote starter you are using. I am sure someone here can help program that function.

Be careful whose advice you buy, but be patient with those who supply it. Disarm factory alarm -- posted image.

Back to Top

f00dstamps

Copper - Posts: 132

Joined: December 24, 2004

Location: United States

Posted: February 10, 2005 at 9:17 AM / IP Logged

i'm having the same problem with a sequoia that also disarms the factory alarm with unlock. A few other guys have suggested the blue or blue/white wire which provides a status (-) output during remote start. i have a clifford matrix rsx 3.5.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Disarm factory alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.