the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 camry remorte start wiring Colors


Post ReplyPost New Topic
< Prev Topic Next Topic >
lookingforvtec 
Member - Posts: 13
Member spacespace
Joined: October 28, 2004
Location: United States
Posted: February 10, 2005 at 9:33 PM / IP Logged  
I need the wiring color and location for a 2005 camary. I'm installing a remort start alarm. I done an 03 and remember something about having to diode isolating the door pins. Thanks
Dreaming about thing that I want only to away to find things that I can't have... But that's life!! And I deal the best way that I know how..Down shifting and taking it to the red!!!!!
thepencil 
Gold - Posts: 1,526
Gold spacespace
Joined: December 16, 2002
Location: Canada
Posted: February 10, 2005 at 10:10 PM / IP Logged  
DIRECTWIRE™ WIRING INFORMATION - TOYOTA / CAMRY / 2005 / Remote Start
[PRINT THIS PAGE]
12volts WHITE/ red (30A), white (5A)   +   ignition harness
Starter BLACK/ white   +   ignition harness
Second Starter BLACK / YELLOW   +   ignition harness
Ignition BLACK/ red   +   ignition harness
Second Ignition BLACK / YELLOW   +   ignition harness
Third Ignition N/A       
Accessory blue/red   +   ignition harness
Second Accessory N/A       
Keysense blue   -   ign harn or BECU, top plug, pin 19
Notes: Using the status output to trigger this wire during remote start will disarm the alarm without unlocking the doors.
The Body ECU is attached to the back of the fuse box under the driver side dash. The plugs for the BECU are on the left side edge.
Power Lock blue / YELLOW   -   DKP or bottom of fusebox, 20 pin plg
Notes: Meter this wire while turning the key in the driver door key cylinder.
Power Unlock blue (double pulse)   -   DKP or BECU, top plug, pin 22
Notes: Meter this wire while turning the key in the driver door key cylinder.
The Body ECU is attached to the back of the fuse box under the driver side dash. The plugs for the BECU are on the left side edge.
Can also use the passenger door key cylinder unlock wire, which only requires a single pulse. It is blue/white (-) in the BECU, top plug, pin 21.
Lock Motor blue/red   5wi DKP or bottom of fusebox, 13 pin plg
Unlock Motor blue/black   5wi DKP or BECU, bottom plug, pin 11
Notes: The Body ECU is attached to the back of the fuse box under the driver side dash. The plugs for the BECU are on the left side edge.
Parking Lights+ green   +   DKP or bottom of fusebox, 20 pin plg
Parking Lights- red   -   switch or BECU, top plug, pin 8
Notes: The Body ECU is attached to the back of the fuse box under the driver side dash. The plugs for the BECU are on the left side edge.
Hazards lt. GREEN/ black   -   switch or BECU, middle plug, pin 10
Notes: The Body ECU is attached to the back of the fuse box under the driver side dash. The plugs for the BECU are on the left side edge.
Turn Signal(L) GREEN / WHITE   +   turn signal flasher relay in DKP
Turn Signal(R) GREEN/ YELLOW   +   turn signal flasher relay in DKP
Reverse Light RED / black   +   DKP or bottom of fusebox, 20 pin plg
Door Trigger see notes   -   see notes
Notes: The LF door is RED / green in the BECU, bottom plug, pin 1. The RF door is RED / green in the BECU, top plug, pin 11. The rear doors are RED / white in the bottom of the fuse box, 20 pin plug, pin 7. Use all three wires and diode isolate each.
The Body ECU is attached to the back of the fuse box under the driver side dash. The plugs for the BECU are on the left side edge.
Dome Supervision GREEN/ red   -   ignition key cylinder light
Trunk/Hatch Pin green   -   DKP or BECU, bottom plug, pin 6
Notes: The Body ECU is attached to the back of the fuse box under the driver side dash. The plugs for the BECU are on the left side edge.
Hood Pin black   -   theft deterrent ECU behind glovebox
Trunk/Hatch Release WHITE/ blue   5wi DKP or BECU, bottom plug, pin 12
Notes: The Body ECU is attached to the back of the fuse box under the driver side dash. The plugs for the BECU are on the left side edge.
Power Sliding Door N/A       
Factory Alarm Arm arms with lock       
Factory Alarm Disarm disarms with unlock       
Disarm No Unlock use key sense wire       
Tachometer BLACK/ orange   ac   ECM behind glovebox
Notes: On the 4 cylinder models, it is in the 2nd plug from the top, pin 1. On the 6 cylinder models, it is in the top plug, pin 5.
Can also go to any ignition coil or fuel injector and use the wire that is NOT BLACK/ red, WHITE/ red, or WHITE/ black.
Wait to start N/A       
Brake Wire GREEN / WHITE   +   sw or bottom of fusebox, 20 pin plug
Parking Brake RED / white   -   parking brake switch
Horn Trigger GREEN/ black   -   sw or bottom of fusebox, 24 pin plug
Memory Seat 1 N/A       
Memory Seat 2 N/A       
Memory Seat 3 N/A       
Immobilizer Bypass Module: Required: Yes Type: Transponder Part #: 556U or 555U
Notes: Standard on the LE V6, SE V6, and XLE models.
      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.
Be careful whose advice you buy, but be patient with those who supply it.2005 camry remorte start wiring Colors -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer