the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Delta...model?..manual...troubleshooting


Post ReplyPost New Topic
< Prev Topic Next Topic >
atwest1 
Member - Posts: 8
Member spacespace
Joined: February 17, 2005
Posted: February 17, 2005 at 3:17 PM / IP Logged  

Hi Folks,

I am trying to identify the model of the unit in my vehicle so I might fix what is ailing it. 

It is a "Delta Vehicle Security" unit that was installed in late 1999. There are no other identifying markings on the case or PCB. This sort of tells me that it is low-end model.

thx, A

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 17, 2005 at 5:34 PM / IP Logged  
Is this the 3 button 2 way unit ? Delta along with some other companies from the late 90's all came out with the same product. Try doing s search in Crimestopper site and see if you find something there that might match what your after. They have very similiar proiducts between the two companies.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
atwest1 
Member - Posts: 8
Member spacespace
Joined: February 17, 2005
Posted: February 17, 2005 at 10:24 PM / IP Logged  

Thx for the info Jeff,

It is a one way - 4 button remote.  ---> http://www.car-alarms.com/acces.html (bottom of page, item# T-4b)

After serching the CrimeStopper site, I found CS-9704RS to be close. (but not exact) http://www.crimestopper.com/techweb/ProductDiagrams/cs9704.PDF

I guess my real problem with the Passlock system... Occasional "CRANK - NO START", with remote and/or key. (security light flashing on dash when this happens)

I need to find the bypass modual (or resistor) that was installed by the technician.

regards,

Al


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer