01 Accord Alarm issue

Home / the12volt's Install Bay / Car Security and Convenience / 01 Accord Alarm issue (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: February 26, 2005 at 2:37 PM / IP Logged

I recently changed my lock and unlock wires for my car to the wires that arm and disarm the factory alarm while also locking the car. Now when I remote start my car..the horn honks. Do I need to hook up the disarm defeat wire as well? The only reason I want to have the factoy alarm hooked up so the horn honks while the alarm is going off. And I really don't want to use a relay for it if the car can do it just by hooking up different wires. Any suggestions?

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: February 26, 2005 at 7:36 PM / IP Logged

01 Accord, and a Clifford RSX3.5

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: February 26, 2005 at 8:37 PM / IP Logged

Is it an lx or ex

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: February 27, 2005 at 12:42 AM / IP Logged

sounds like a EX. youll need to use the disarm wire, grn/blk on rsx3.5, (if i remember) w/ a relay to the blue wire at the door.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

01 Accord Alarm issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.