Vac locks on '90 Audi Coupe

Home / the12volt's Install Bay / Car Security and Convenience / Vac locks on '90 Audi Coupe (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

JettasDaddy

Member - Posts: 2

Joined: February 25, 2005

Posted: February 26, 2005 at 10:06 PM / IP Logged

Car in question is a 1990 Audi Coupe quattro with vac locks. I installed a Codealarm CSI300 this afternoon, but I cannot get the locks to operate. I have wired up a pair of relays as described in the vac locks section here, as well as a tech sheet on Codealarms website. They were slightly different, but neither setup functioned. I did set the pulse to 3.5 seconds, and I can feel the relays operating, but nothing happens to the locks. The relays are triggered by two negative outputs from the box. The locking system is similar on all B3 chasis Audi 80/90, from 88 'til '92.

Any adice or BTDT would be greatly appreciated!

Nik

Back to Top

JettasDaddy

Member - Posts: 2

Joined: February 25, 2005

Posted: February 27, 2005 at 12:51 AM / IP Logged

Oops... bad relay!

Rewired the relays to a third spec, and still no go. Tested the individual relays and found a dead one.

Thanks anyway!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Vac locks on '90 Audi Coupe

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.