matrix 3.5 no respone or led pulse?

Home / the12volt's Install Bay / Car Security and Convenience / matrix 3.5 no respone or led pulse? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jaykillahoe

Member - Posts: 5

Joined: March 01, 2005

Location: United States

Posted: March 03, 2005 at 11:38 AM / IP Logged

i have a problem with my alarm it, i can't get the remote to respond when the sensors are hit it sends i can see it on the remote but eveery time i try to press a button there is no response. my led dosen't flash nether, do i have it connected correctly. where do i connect the orange -500 mA wire to. need

jay

Back to Top

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: March 03, 2005 at 8:19 PM / IP Logged

try to disconect the wires fron the antena and wait 5 minutes and plug it back for some reason the pager sometimes get disprogram try to program the remote too. check if the alarm is in valet

how own your mind, control your life.

MECP certified. always use a DMM

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

matrix 3.5 no respone or led pulse?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.