Help, I'm locked out! Remote not working.

Home / the12volt's Install Bay / Car Security and Convenience / Help, I'm locked out! Remote not working. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hypervette

Member - Posts: 4

Joined: October 07, 2002

Location: United States

Posted: November 05, 2002 at 9:57 AM / IP Logged

Does anyone know why my 2-way pager remote no longer activates my alarm. It beeps when I push to arm and disarm and attempt a remote start (which never worked) but nothing happens with the alarm. Yet the alarm will still passive arm if I'm not in valet mode. I have tried to reprogram but that didn't work either, still just beeps. My battery did malfuntion after it went dead but jump started and the alarm works like it's supposed to, it just can't be activated remotely. Help Please!

hypervette

Member - Posts: 4

Joined: October 07, 2002

Location: United States

Posted: November 05, 2002 at 10:25 AM / IP Logged

Nevermind, my sensor was unplugged. Don't I feel stupid. Okay now why is my door constantly being triggered. No lights on anymore, hooked the door trigger to the - side of driver courtesy light. Took care of problem with the light staying on all the time so maybe it was hooked up to the door pin which could be bad which may be why the light was staying on all the time. If that's the case, why wouldn't my courtesy lights still be on after I relocated connection?

kickyride

Copper - Posts: 100

Joined: September 20, 2002

Location: Georgia, United States

Posted: November 05, 2002 at 10:36 AM / IP Logged

You need to make sure that you are connected to the wire that changes polarity when you open or close the door. If the wire shows ground when the door is open, then you need to make sure that you are using the alarm's negative door trigger input. If the wire shows +12 volts when the door is open, then you need to make sure that you are using the alarm's positive door trigger input. Hope this helps.

Mike

Sales/Tech Support - KICKYRIDEoCOM mobile electronics

MECP 1st class-Security Specialist

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help, I'm locked out! Remote not working.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.