ct3300

Home / the12volt's Install Bay / Car Security and Convenience / ct3300 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

denis mcginn

Member - Posts: 6

Joined: December 26, 2003

Posted: March 08, 2005 at 4:09 PM / IP Logged

I'm trying to install ct3300 on 2000 venture van, I had every thing working fine. Then I decided to change some programming functions. Now van will not start, flashes lights 3 times(hardware reset????) is what manual says, locks work fine and no security on van.

Any help would be great!!! Thanks, denis

denis mcginn

Member - Posts: 6

Joined: December 26, 2003

Posted: March 09, 2005 at 8:01 AM / IP Logged

To add the above thread, the parking lights flash 3 times and then the module shuts down, and vehicle does not start.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: March 09, 2005 at 12:20 PM / IP Logged

whats does the 3flashes mean?

pull up the shutdown history, look in install manual.

what was teh programming you changed?

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

denis mcginn

Member - Posts: 6

Joined: December 26, 2003

Posted: March 09, 2005 at 1:53 PM / IP Logged

Thanks for the reply, three flashes means "remote start attempt cancelled by remote". I changed the "ignition controlled door locks" and starter kill to "active", no starter kill installed

denis mcginn

Member - Posts: 6

Joined: December 26, 2003

Posted: March 09, 2005 at 1:57 PM / IP Logged

Three flashes means "remote start attempt cancelled by remote" or it also says "entering cold start mode" all I changed was "ignition controlled door locks and starter kill to "active" because I did not install starter kill option.

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: March 10, 2005 at 11:05 AM / IP Logged

Get yourself out of valet mode. You are probably in valet mode right now.

Be careful whose advice you buy, but be patient with those who supply it. ct3300 -- posted image.

denis mcginn

Member - Posts: 6

Joined: December 26, 2003

Posted: March 14, 2005 at 1:57 PM / IP Logged

Thank you for the advice, everything is okay now!!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ct3300

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.