2 stage shock sensor

{TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" UNABLE="on"}{TR height="100%" UNABLE="on" width="100%"}{TD id=HB_Focus_Element vAlign=top width="100%" background=""0 UNABLE="off"}{p}I have a Cyclops Alarm installed in my vehicle and i would like some information on the following:{/p}{p}Cyclops has Auxllary input for optional sensor (as above){/p}{p}I would like to add a 2 stage shock sensor onto it, the wiring for the sensor (Autowatch) states to wire as follows: {/p}{p}Red- +12v.. Easy one that {/p}{p}Black- ground - almost easy..{/p}{p}Blue -Trigger, this is where i get a bit messed up,{/p}{p}green - Warning,  should i join the green and blue together using a diode and then connect to the alarm trigger? if this isnt correct what should i be doing to get this to work?{/p}{/TD}{/TR}{/TABLE}{div style="width:240px;border-bottom:1px solid #eeeeee;margin-top:10px;margin-bottom:0px;"}{/div}{span style="font-size:.70em;line-height:1.2em;color:#000000;"}Australia's Loudest Street Max 3-4 Car Ever!{/span}

Here is what you should do: http://www.velocitymotorsport.com/images/install_notes/155.jpgJeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

seperate inputs, one for the first stage and one for the second stage. only on dei products can you use only one input, because of the multiplex inputs.gcorrea