93 Acura Legend Trunk Trigger

I'm currently installing the Viper 791XV on my 93 acura legend sedan.....and i pretty much got most of the wires hooked up and working properly but i'm still looking for the (-) negative trunk trigger....i've tried all the suggested wires like.....Wht/Blk..........above the driver kick panelGrn/Blk..........at rear harness behind driver kick panelBlu/Blk..........at rear harness behind driver kick panelGrn/Red........at rear harness behind driver kick panel.........but none of these wires seems to give me the (-) negative ouput i'm looking for....its been 2days already and i really want to finish this install so i can move onto installing the 530T window modules........it would be greatly appreciated if anyone can please show me where the (-) negative trunk trigger is and also the (-) negative hood trigger....any pictures tutorial or wire diagram would be greatly appreciated...thanks in advance

What I see for the hood pin is Yellow/Red located at the anti theft module. (Not sure where that's located in this vehicle hope you do)      For the trunk I see GREEN/ black at the plug on back of the cluster.     Good luck.  Let us know

i was wondering if i can access the (-) negative trunk trigger from anywhere else besides in back of the cluster.......

run a wire all the way back to the tunk pin itself, if all eles fails.

That just might be the easiest thing to do.

Finally!!!..after 3days....its done....yes very ture....running a wire all the way back to the trunk pin itself will work....but i had found an easier way of getting the (-) negative trunk trigger and its located right underneth the dash....for the (-) negative trunk trigger use the BLUE/GREEN wire from the security module...well i appreciated all the advice...