trunk release when armed

Not sure what Alarm or Vehicle.............but some Alarms DO Disarm when you "pop" the trunk............Some have you Unlock the Doors before opening trunk to Disarm.  MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Well DEI alarms may bypass certain zones when an aux output is engaged. It isn't really disarming just turning off that peticular input. Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

The alarm system is by Viper...its the 791xv and my car is a 93 acura legend sedan.....any replys would help alot....thanks...

if it is just an aux channel then it might not dissarm, but almost all alarms on the chnl 2 or specifix trunk release channel it will disarm and some even unlock the doors with the truck release, this is usually a programable option also, but most alarms have it set to disarm with trunk releaseBad Boys Customs

    audio - video - security

If you use it. Suport it. Donate to the 12 volt!

so Captanham....you're saying that my wiring for my trunk release might be wrong....and that my security system should NOT be armed and the sirens should go off...after the trunk is popped????please reply in details.....what is the proper and normal outcome of the security system when the CH2 AUX is activated...

no no no,, sorry if i made it seem that way, i'm not a very good typer, haha.... ok, NORMAL alarms, when you hit the trunk button, will disarm, pop the trunk, AND some company's will even unlock the door,, so when you hit the trunk button, it's disarmed, like you were going from the store to put grocery's in it and then you can just get in your unlocked car and go,, but most companies also make this an optional setting, it disarms like that from the factory, but if you don't want it to most companies give you the choice to shut the disarm off.. did you look at the users manual about this? look at the section that talkes about the RED / white wire, it will probably tell you if it does..If your alarm doesn't disarm, and you want it to, then you can put some diodes on the red white wire to isolate it from the relay for your trunk (if it even needed a relay) and run a wire to your disarm alarm wire on the viper.. then it will disarm with the trunk Bad Boys Customs

    audio - video - security

If you use it. Suport it. Donate to the 12 volt!

sorry if it's not a viper, i thought you said up there that it was, but anyways, most alarms do still have a (-) pulsed disarm input that you could easily tie in to your trunk output so that you can make sure it disarms.. Bad Boys Customs

    audio - video - security

If you use it. Suport it. Donate to the 12 volt!

ohh..ok...well it is a viper alarm system....its the 791xv model.....and yes it does have the RED / white wire from the alarm system...thats the ch2....and thats the one i hooked my trunk release relay too....but i'm still unclear bout the whole thing....so am i suppose to add another relay to the trunk release relay to make it disarm the arm also.....i'm soo sorry if i sound like a total rookie to this whole thing....thats cuz i am....is there any other way besides having to add another relay to the trunk release circuit.....maybe tappin at a different point of the factory trunk release wire????/...i dunno..please reply