pass lock 2 bypass(Jeff)

I got the diagram that you posted for me but I dont quite understand where to hook up the wire that has the diode on it.  You said to hook it to a wire that is grounded out while the engine is running(where do I find that wire?) Also why does pin 30 on the same relay go to ground? Sorry but I just dont see why you need it.   Thanks in advance BrianH

The wire he is reffering to is an output from the remote starter.  It puts out a ground pulse while the remote start is running.  As for your other question I would need to see the diagram but I would just do it the way it is suggested as it is right if jeff sent it to you ;)

Thanks for the info.I just couldnt fiqure out where to hook it up at.  I know that Jeffs info was right I was just wondering why?  I was not doughting him at all.  He has helped me out alot! I only posted the topic with his name in it because he knew what we were talking about. Thanks again for the info.  Brianh