Alarm Power

Home / the12volt's Install Bay / Car Security and Convenience / Alarm Power (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

meh66

Copper - Posts: 266

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 26, 2003

Location: United States

Posted: April 28, 2005 at 7:57 AM / IP Logged

I am studying for the MECP and I have a question about powering an alarm. In the alarms I have installed, In most cases I always used the constant 12V wire found in the ignition harness to power the alarm. However, the MECP Basic study guide recommended that the alarm should be powered from the battery. I wanted to know what method is best? I never had an issue with using the wire in the ignition, but I want to ensure I am during a quality install.

MEH66

"Car Performance and Mobile Electronic Enthusiats"

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: April 28, 2005 at 8:31 AM / IP Logged

i'm no expert but as fas as i'm concerned and from viewing other peoples installs its done off the ignition

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm Power

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.