viper 791xv command signal problem

Home / the12volt's Install Bay / Car Security and Convenience / viper 791xv command signal problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

anekin007

Member - Posts: 14

Joined: October 29, 2004

Location: United States

Posted: April 28, 2005 at 9:42 PM / IP Logged

i just got my car installed with the 791xv. everything seems to be fine. except car does not shut off with the remote. but mainly i cant figure out whats wrong with the lcd or alarm. on the lcd the only thing that shows is the battery life and the unlock icon even if i press arm/disarm it is doesnt change on the lcd just stays on unlock. even with remote start the icon for it doesnt show up. when i press arm/disarm the transmit and receive icon flashes then the remote makes 3 beeps and flashes the signal icon on each of those 3 beeps. according to the manual when the signal icon shows it means that a command page is transmitted but a command page is not recieved. how do i get all my icons do show up?

Back to Top

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: April 28, 2005 at 10:14 PM / IP Logged

Sounds like you have a bad remote...which is very common. I just sent my alarm back to DEI. They better not send me one of those LCD remotes back. I want the new one with the LEDs on it. I've gone through two of those alarms already.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 791xv command signal problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.