the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Compustar 2WSS-AS Problem

Home / the12volt's Install Bay / Car Security and Convenience / Compustar 2WSS-AS Problem (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
ZQ8pAUL 
Copper - Posts: 57
Copper spacespace
Joined: June 16, 2004
Location: United States
Posted: May 03, 2005 at 1:26 AM / IP Logged  
OK guys, I've basically got my 2WSS-AS hooked up, with the exception of remote start because I'm waiting on the PLXR module. When I go to learn the remote to the brain, I take the battery out of the remote, cycle the key on and off 5 times like it says, then after the brain clicks twice, i put the battery back into the remote. For some reason the remote isn't reading the brain or vice-versa, and I can't use the remote to arm the system. Any ideas on what the problem is?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 03, 2005 at 6:42 AM / IP Logged  

Place the battery in the remote before you toggle the system 5 times ( WITHIN 3 SECONDS ) and press button # 1 after this. It is VERY important that you do the toggling within 3 seconds and press button # 1 right after otherwise this sequence will not work.

I will try to answer your PM later today. I've been really busy the last couple of days and seem to have less and less time as summer rolls in.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
ZQ8pAUL 
Copper - Posts: 57
Copper spacespace
Joined: June 16, 2004
Location: United States
Posted: May 03, 2005 at 2:19 PM / IP Logged  
serious problem now. I got the alarm to work, but now it won't unlock and my keys are inside the truck! what do i need to do???
ZQ8pAUL 
Copper - Posts: 57
Copper spacespace
Joined: June 16, 2004
Location: United States
Posted: May 03, 2005 at 2:35 PM / IP Logged  
well i found my spare keys, got into the truck, now i can't get the brain to do anything... Any ideas?
ZQ8pAUL 
Copper - Posts: 57
Copper spacespace
Joined: June 16, 2004
Location: United States
Posted: May 03, 2005 at 3:10 PM / IP Logged  
ok well I figured that problem out. Blew the ignition fuse. There are two BROWN / white wires on the park light harness and i can't get the park lights to flash, and when it's hooked to one, the fuse blows when the alarm is armed, the other wire it doesn't do anything, no park light flash or anything at all.
Calgarysouth 
Member - Posts: 39
Member spacespace
Joined: April 19, 2005
Location: Canada
Posted: May 03, 2005 at 3:32 PM / IP Logged  

what kind of truck is it???

i can't think of one where the park light wire is BROWN / white

ZQ8pAUL 
Copper - Posts: 57
Copper spacespace
Joined: June 16, 2004
Location: United States
Posted: May 03, 2005 at 4:13 PM / IP Logged  
it's a 2004 chevy colorado.
Calgarysouth 
Member - Posts: 39
Member spacespace
Joined: April 19, 2005
Location: Canada
Posted: May 03, 2005 at 6:46 PM / IP Logged  
okay, so are you using negative parklights on the alarm??
ZQ8pAUL 
Copper - Posts: 57
Copper spacespace
Joined: June 16, 2004
Location: United States
Posted: May 03, 2005 at 7:11 PM / IP Logged  
there's one wire that says its for the park lights, it's a thicker gauge than the other one that says its for the light output.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 04, 2005 at 12:01 AM / IP Logged  
If your using the (-) parking lights of the Colorado, then you can not use the GREEN / WHITE wire from the CN1 harness. YOu can only use the (-) parking light wire from the GREEN one from the CN2 harness.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer