2002 Impala Power Lock

Home / the12volt's Install Bay / Car Security and Convenience / 2002 Impala Power Lock (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

vestjam

Member - Posts: 2

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 19, 2005

Location: United States

Posted: May 15, 2005 at 9:41 PM / IP Logged

Hello, I'm a "do it yourself" type and I know just enough to be dangerous with vehicle electronics. Plus I'm too cheap to pay to have it done. I wanted to install a RS with Alarm in a 2002 Impala. I've located all my wires and learned that the lock/unlock use the same wire. The Note states "Lock requires a negative tripper with a 470 ohm resistor in -line. Unlock is negative trigger. Must use relays." The RS/Alarm sends a negative trigger.

How do I complete the wiring with the relays with resistor? Any and all help is welcome.

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: May 15, 2005 at 10:23 PM / IP Logged

just like this, Just change the resistor value. Make sure the resitor goes on the lock relay.

2002 Impala Power Lock -- posted image.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: May 16, 2005 at 8:22 AM / IP Logged

................Somthin's BURNIN'....................................

Better LOOK at that Relay Post again................

That is for POSITIVE Pulse...............

Change PIN's 87 to GROUND

PIN's 86 & 85 go to Constant 12 Volts.......

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: May 16, 2005 at 9:35 AM / IP Logged

Correct. I totally ovel look it. late night.,

Read mo12v post.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

vestjam

Member - Posts: 2

Joined: March 19, 2005

Location: United States

Posted: May 16, 2005 at 7:33 PM / IP Logged

Thanks for the information.... I'll let you know how it turns out.

One more quick question. Is it necessary to disable the factory door lock/unlock (BCM) when the alarm/RS is being used?

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: May 16, 2005 at 11:03 PM / IP Logged

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 Impala Power Lock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.