pug 206 hdi alarm to window closure ?

Home / the12volt's Install Bay / Car Security and Convenience / pug 206 hdi alarm to window closure ? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rwballard

Member - Posts: 4

Joined: May 17, 2005

Location: United Kingdom

Posted: May 17, 2005 at 4:40 PM / IP Logged

Does any one know how to connect a window closure interface to a standard 2001 pug 206 HDI Alarm system?

The alarm has remote locking and ultrasonic sensors, a siren under the bonnet, and is built int the cars "BSI unit"

I need either a positive or negative feed when the alarm is armed

Thanks

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: May 17, 2005 at 4:50 PM / IP Logged

are you sure thats its a peugeot alarm and not 3rd party

rwballard

Member - Posts: 4

Joined: May 17, 2005

Location: United Kingdom

Posted: May 17, 2005 at 4:54 PM / IP Logged

Yep, It has the original peugeot remote, and when I disconnected some wiring plugs from the "BSI unit" which is under the fuse box, the alarm no longer worked.

rwballard

Member - Posts: 4

Joined: May 17, 2005

Location: United Kingdom

Posted: May 17, 2005 at 4:57 PM / IP Logged

In the Haynes manual it says that the BSI unit controls a number of things, including alarm, c/locking, interior light delay, so it has to be original.

It is made by Siemens though and not peugeot

rwballard

Member - Posts: 4

Joined: May 17, 2005

Location: United Kingdom

Posted: May 18, 2005 at 12:35 PM / IP Logged

can any one help? where can i get a wiring diagram of the alarm system?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pug 206 hdi alarm to window closure ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.