dome light1

Home / the12volt's Install Bay / Car Security and Convenience / dome light1 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Hickmanae3

Copper - Posts: 67

Joined: April 08, 2005

Posted: June 09, 2005 at 9:38 PM / IP Logged

i am tryin to install that new galaxy color screen lcd alarm into my car and the problem i ran into the other night was my dome light will not cut off with or without the alarm disconnect. and igintion turned on or off. i have an 97 explorer and what i notice so far was if i cut the door tigger wire (black and light blue). my back two dome lights cuts off perfect after i start and turn off the ignition. but not the front dome light. the front dome light stays on no matter if the ignition is on or off and if the alarm is hook up or not. so how can i get all three dome lights to work properly. and what is the main dome light wire that ccontrols all three doem lights.

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: June 09, 2005 at 11:02 PM / IP Logged

R U sure someone didn't turn the Front dome light ON??

Unless you have changed the wires, they should be interconnected.

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Hickmanae3

Copper - Posts: 67

Joined: April 08, 2005

Posted: June 10, 2005 at 1:51 AM / IP Logged

yes im sure i have not turned the dome light on . But other then that where can i find the wire that driectly controls the dome light besides the door trigger wire

No security system can beat the tow truck :(

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: June 10, 2005 at 5:40 AM / IP Logged

try the wire at the dome light switch see if that still gives the same problem.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dome light1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.