the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

oldsmobile keyless entry program


Post ReplyPost New Topic
< Prev Topic Next Topic >
tonya1961 
Member - Posts: 3
Member spacespace
Joined: June 13, 2005
Location: United States
Posted: June 13, 2005 at 1:32 PM / IP Logged  
Can anyone help me with programming my keyless entry for a 98 Oldsmobile Alero?  I have two remotes and both need to be programed. Thanks in advance for your help.oldsmobile keyless entry program -- posted image.
thanks, tt
thepencil 
Gold - Posts: 1,526
Gold spacespace
Joined: December 16, 2002
Location: Canada
Posted: June 14, 2005 at 9:59 AM / IP Logged  
What brand of remote is it?
Be careful whose advice you buy, but be patient with those who supply it.oldsmobile keyless entry program -- posted image.
danieljaluise 
Copper - Posts: 125
Copper spacespace
Joined: January 19, 2003
Location: United States
Posted: June 14, 2005 at 11:18 AM / IP Logged  
there is a wire behind the carpet by the radio antenna in the trunk. It should have a little plastic connector on it. you need to ground that wire, which should cause the locks to "cycle"....keep the wire grounded then push the buttons on the key fob.....unground wire....
the above should work....never pay the dealer for something that easy...
danieljaluise 
Copper - Posts: 125
Copper spacespace
Joined: January 19, 2003
Location: United States
Posted: June 14, 2005 at 11:34 AM / IP Logged  
oldsmobile keyless entry program -- posted image.
tonya1961 
Member - Posts: 3
Member spacespace
Joined: June 13, 2005
Location: United States
Posted: June 14, 2005 at 11:35 AM / IP Logged  

The remote is the one that came with the car,  the identification numbers on the remote are as follows:

GM/UTA 25678792

FCC ID: KOBUT1BT

thanks, tt
tonya1961 
Member - Posts: 3
Member spacespace
Joined: June 13, 2005
Location: United States
Posted: June 15, 2005 at 1:11 PM / IP Logged  

I'm feeling real stupid because my car is a 99 Oldsmobile Alero not a 98 like I had mistyped in the original message.  Can anyone tell me how to program my keyless entry?

Thanks

thanks, tt

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer