Remote not programming

Home / the12volt's Install Bay / Car Security and Convenience / Remote not programming (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

93expxlt

Member - Posts: 2

Joined: May 31, 2005

Location: Canada

Posted: June 19, 2005 at 2:38 AM / IP Logged

Installing a Predator 4901TW alarm/command start combo into a 1992 Ford Explorer. I can't seem to program the remote. I have the installation guide & it says:

- turn key on/off

-press & hold brakes

-press valet button 5 times, siren will chrip 3 times

-release brake pedal

-press lock button on the 5 button remote & siren will chirp once - I can't get it to do this, the alarm seems to be hooked up correctly, led flashes when the brakes or valet switch is pressed. It will chirp 3 times & the led will glow constantly but will not chirp to confirm programming, Can anyone help?

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: June 19, 2005 at 9:51 AM / IP Logged

is your antenna plug in all the way.

93expxlt

Member - Posts: 2

Joined: May 31, 2005

Location: Canada

Posted: June 19, 2005 at 1:44 PM / IP Logged

Yep, checked them (its a 2-way) both a couple of times

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote not programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.