Smartwindows 4

Home / the12volt's Install Bay / Car Security and Convenience / Smartwindows 4 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Jerry79

Member - Posts: 7

Joined: August 11, 2005

Posted: August 16, 2005 at 3:56 AM / IP Logged

I am wokirng on a 2000 corvette, smartwindows wiring was very simple. All windows are wired. but the windows only roll about 2 inches at a time. They only move 2 inches regardless if I use the remote to open them or use the car switch to roll up the windows. Any ideas. Also for the same car I'm also installing intellistart, having bunch of problem to start with can't get the tach to program. How do i use the voltage instead of tach.

5150azn

Silver - Posts: 584

Joined: June 21, 2004

Location: United States

Posted: August 16, 2005 at 1:51 PM / IP Logged

are you going to the motor wires or the switch wires?

Tell the Snap-On guy I'm not here!

Jerry79

Member - Posts: 7

Joined: August 11, 2005

Posted: August 16, 2005 at 2:24 PM / IP Logged

I went to the motor wires. Thank you for the response I figured it out last night.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Smartwindows 4

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.