Clifford Omnisensor

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Omnisensor (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dcabinatan

Member - Posts: 4

Joined: August 04, 2002

Location: United States

Posted: August 22, 2005 at 8:00 AM / IP Logged

I have an older Clifford Omnisensor ('94-'95) and would like to know how to wire it up to a 791XV and be able to adjust the sensitivity on it.

ringojam

Copper - Posts: 215

Joined: June 10, 2003

Location: Manitoba, Jamaica

Posted: August 22, 2005 at 5:01 PM / IP Logged

Omnisensors ar adjustable only with a clifford alarm get a directed 508d dual zone radar sensor

its_radio_shop

Copper - Posts: 76

Joined: March 16, 2004

Location: United States

Posted: August 23, 2005 at 11:21 PM / IP Logged

Dual zone radar sensor isnt a very good alternative for someone wanting to use an omnisensor. But as posted above, the omnisensor has to be wired to the Clifford alarm to work. If you do not have the Clifford alarm you should just look for a good quality dual stage shock sensor.

Search for other posts by its_radio_shop

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford Omnisensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.