adding actuators

Home / the12volt's Install Bay / Car Security and Convenience / adding actuators (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rabbit713

Member - Posts: 6

Joined: July 13, 2005

Location: United States

Posted: August 24, 2005 at 8:06 PM / IP Logged

is this wiring diagram correct? cause i tried it and it only unlocked. (i think pins 86 go together instead of 86 to 85.)

Rabbit713

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 24, 2005 at 8:14 PM / IP Logged

I don't know? There is no diagram or link,

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

rabbit713

Member - Posts: 6

Joined: July 13, 2005

Location: United States

Posted: August 24, 2005 at 8:19 PM / IP Logged

oh my bad i forgot to do that...........well here it is

https://www.the12volt.com/doorlocks/page3.asp#arp

Rabbit713

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 24, 2005 at 8:23 PM / IP Logged

Yes this diagram is correct.

Pins 85 and 86 are not polar in most cases and it doesn't matter what goes where but that diagram is correct. I would check the wires and make sure you have +12V going to pin 87 of the lock relay and the alarm is sending out the pulse to the lock relay.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

rabbit713

Member - Posts: 6

Joined: July 13, 2005

Location: United States

Posted: August 24, 2005 at 8:27 PM / IP Logged

oh thanks....maybe its because i was testing this on a bench multimeter and power supply. but the unlock output was working) does this type of testing matter

Rabbit713

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

adding actuators

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.