98 Explorer remote start

Home / the12volt's Install Bay / Car Security and Convenience / 98 Explorer remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Nelsenkr

Member - Posts: 6

Joined: August 01, 2003

Location: United States

Posted: September 18, 2005 at 6:10 PM / IP Logged

I have a 98 explorer,I am instelling a autopage 750 with remote start, The alarm works fine and the truck will start and run. Which wire do i use to get A/C to work? I have 2 gray / YELLOW do I need both to start and run?

Thanks for all the help.............

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: September 18, 2005 at 6:41 PM / IP Logged

Ignition #2	GRAY / YELLOW	IGNITION SWITCH HARNESS **
Ignition #3	N/A
Accessory	BLACK/ L GREEN	IGNITION SWITCH HARNESS

** There Are Two GRAY / YELLOW Wires Located In The Ignition Switch Harness. Only One Needs To Be Powered For Remote Start Applications, The Correct Circuit Will Power The Heat/Ac.

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Nelsenkr

Member - Posts: 6

Joined: August 01, 2003

Location: United States

Posted: September 18, 2005 at 7:11 PM / IP Logged

Tried both wires, no good, starts good with one or the other but no fan.

Back to Top

Nelsenkr

Member - Posts: 6

Joined: August 01, 2003

Location: United States

Posted: September 18, 2005 at 7:56 PM / IP Logged

Thank a lot had a bad conection on one of the gray / YELLOW wires..

Kevin

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 Explorer remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.