Rattler remote start problems

Home / the12volt's Install Bay / Car Security and Convenience / Rattler remote start problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

92rustang

Member - Posts: 5

Joined: October 02, 2005

Posted: October 02, 2005 at 9:53 PM / IP Logged

I have got everything working, but the starter does not disengage after 15 seconds. I checked the programming and it all seems right. It is set for tach checking and crank time is .06 sec. Any other ideas? Thanks for the help this looks like a forum I will use allot.

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: October 03, 2005 at 12:21 AM / IP Logged

What wire did you use for tach?

Did you program tach?

We're all gonna assume you have a 92 Mustang....

Back to Top

92rustang

Member - Posts: 5

Joined: October 02, 2005

Posted: October 03, 2005 at 4:36 PM / IP Logged

I tried two wires off of the tach. The first was Blue and the second was Red?. Starter does the same thing connected to both. I did read somewhere about programming the Tach but do not remember where. I thought that the engine would not start if the tach needed to be programmed? If you have any info on programming it I will give it a shoot. Thanks again for the help. Yes a do have a 92 Mustang how do you ever guess.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Rattler remote start problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.