Viper 591XV Turn Signal

Home / the12volt's Install Bay / Car Security and Convenience / Viper 591XV Turn Signal (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lexelite

Copper - Posts: 82

Joined: October 16, 2005

Posted: October 18, 2005 at 8:10 AM / IP Logged

Wanted to know if there is anyway to Flash the Turn Signals (2 Channels, Pos) on the Viper 591XV w/o the use of relays?

Confirmation Flash for lock/unlock

In case you want to know, its for LED mirrors :)

Back to Top

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: October 18, 2005 at 9:09 AM / IP Logged

You should be able to take the wire that normally go to the parking light circuit,and tap into the relay that controls ur 4 way flashers..

"ole blake"

Back to Top

ringojam

Copper - Posts: 215

Joined: June 10, 2003

Location: Manitoba, Jamaica

Posted: October 18, 2005 at 3:55 PM / IP Logged

Use 2 diodes from park light and pick up at the hazzard switch.Meaning split the park light with 2 diodes and run one to the left turn and the other to the right turn signal wires at the hazzard switch

Back to Top

lexelite

Copper - Posts: 82

Joined: October 16, 2005

Posted: October 18, 2005 at 4:46 PM / IP Logged

The car only has one relay for both Turn Signals and Hazard Flashers. Not sure how to affect one without the other there.

Is is possible to tap the Hazard Switch instead?

Back to Top

lexelite

Copper - Posts: 82

Joined: October 16, 2005

Posted: October 18, 2005 at 4:52 PM / IP Logged

Do you have a diagram for the Toyota Hazard Switch?

If I read you correctly, you split the wire into a Y- Config then apply a diode after the switch on both sodes.

Right?

Back to Top

lexelite

Copper - Posts: 82

Joined: October 16, 2005

Posted: October 18, 2005 at 5:38 PM / IP Logged

Figured out the wiring, but activation on both sides are +

Does the 591XV pulse a Pos or Neg confirmation signal? If neg, should I use a relay to convert.

Viper 591XV Turn Signal -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 591XV Turn Signal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.