Nissan 2005 transponder

Home / the12volt's Install Bay / Car Security and Convenience / Nissan 2005 transponder (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tintman97

Copper - Posts: 113

Joined: October 20, 2005

Posted: October 24, 2005 at 12:57 PM / IP Logged

Anyone got any advice on this im hooking up a crimestopper rs-999tw1 with the "box" the car just cranks but never starts. Also why would the car crank for so long this thing cranks over for 10 sec or more when i hit it everything else works. As hard as it is to get the ring in there. If i do wire it up without the box how do i wire a relay to it. Velocity do you have a diagram for that. Im guessing i just got it in the wrong place on the cylnder. Let me know i got 4 hrs to finsh and im almost there.

Snapper

tintman97

Copper - Posts: 113

Joined: October 20, 2005

Posted: October 24, 2005 at 12:58 PM / IP Logged

its a altima i forgot

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: October 24, 2005 at 1:03 PM / IP Logged

tintman97 wrote:

Snapper

you put your valet key in the box right??

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

tintman97

Copper - Posts: 113

Joined: October 20, 2005

Posted: October 24, 2005 at 1:31 PM / IP Logged

Valet key? the customer gave me his orignal and had a new one made. just strange as all hell.any chance i mangled the ring to much trying to get it through the opening to get it round the cylnder and thats the prob. Im baffeled.

Snapper

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: October 24, 2005 at 1:40 PM / IP Logged

tintman97 wrote:

Snapper

DID YOUR customer have the key programmed??

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

tintman97

Copper - Posts: 113

Joined: October 20, 2005

Posted: October 24, 2005 at 1:53 PM / IP Logged

yes ok if i put the key in the cylnder half way and hit the remote it starts. Of course i disconnected key sence to verify. and it starts. Just the fact of the sweet spot on the cylnder. The ring still has continuity so its not broke. Im not a novice. Just havent done it for a few years.

Snapper

tintman97

Copper - Posts: 113

Joined: October 20, 2005

Posted: October 24, 2005 at 2:37 PM / IP Logged

the ring is not bad but is there away to check the box or cansomeone post a diagram of how to wire the key to the relay so i can check that

Snapper

tintman97

Copper - Posts: 113

Joined: October 20, 2005

Posted: October 24, 2005 at 8:34 PM / IP Logged

whats the way to do the trans ponder key method the cheap way 22 ga wire wraped around but how do the relays wire in? Oh never got this to work today either cant find the spot on this nissan AT all i can see the factory copper and am right on top of it . Any advice im open all

Snapper

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Nissan 2005 transponder

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.