the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 Malibu remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
csorb 
Copper - Posts: 317
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 28, 2002
Location: United States
Posted: November 20, 2005 at 4:12 PM / IP Logged  
First time doing one of these. I tried to measure resistance between the white and the WHITE/ black at the four pin plug at the ignition switch - during start, but I come up with nothing. I am showing continuity at rest but nothing when I turn the key. I tried several meters. Where am I going wrong?
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 20, 2005 at 6:36 PM / IP Logged  
Did you cut the WHITE / Black wire in half and hook one side of Meter to Ignition side of cut WHITE / Black wire & the other side of Meter to WHITE wire??  Hold Ignition Key to the CRANK position even after it stops cranking.....
Money well spent for the OMEGA IB-PLXR ByPASS..........
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
csorb 
Copper - Posts: 317
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 28, 2002
Location: United States
Posted: November 21, 2005 at 8:46 AM / IP Logged  
I actually did not cut the wire. I just measured them the way they were. I guess that must explain it?
sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: November 22, 2005 at 7:27 PM / IP Logged  
Get your hands on a module part number PKG 7. It is shown on bypasskit.com. It will look after the start functions as well as the transponder system. It is simple and it works.
sparky
redroc 
Member - Posts: 11
Member spacespace
Joined: November 24, 2005
Location: United States
Posted: November 25, 2005 at 12:31 AM / IP Logged  
I agree with Sparkie get yourself a module,makes life easier.But I thought you only need the pkg7 if there is a cross on the key,if no cross the plxr should do you fine.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 16, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer