Python 1500 ESP

Home / the12volt's Install Bay / Car Security and Convenience / Python 1500 ESP (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 24, 2005 at 10:07 AM / IP Logged

I just installed a python 1500 esp in my car. When I hooked the battery back up in my car the alarm immediately starts going off. The alarm brain box is also clicking and so is at least one relay. The alarm status indicator flashes 3 times n repeats. Did I install it wrong? I don't have any preprogrammed remotes for it. I do have a remote but I haven't managed to get it to program, probably b/c of the other problem. Also there isn't a relay on my parking lights like there is for everything else. Does this need a relay? I don't want to burn my alarm up.

actually the status light changes each time I try and work with the alarm. it has flashed anywhere from 2 times to 5 times and repeats that number.

This is my first time ever installing an alarm but I feel confident in my wiring. I got this alarm at a junk yard. Is it possible it is damaged.

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 24, 2005 at 10:30 AM / IP Logged

I know there are some DEI Experts out there!

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 24, 2005 at 11:00 AM / IP Logged

it is installed in a 90 gt mustang vert. Wish I could edit posts.

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 24, 2005 at 11:19 AM / IP Logged

I should be doing just what you said. You will need to hook it up then bypass it with the valet switch. After that you can program your remote.

Mike M2

Tech Manager

CS Dealer Services

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 24, 2005 at 11:34 AM / IP Logged

What did I say to do? How do I bypass it with the valet switch?

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 24, 2005 at 4:33 PM / IP Logged

Am I suppose to program my remote first? The directions for programming it don't seem to work for me, but I dont' know how to bypass the alarm.

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 24, 2005 at 7:44 PM / IP Logged

Do the parking lights need a relay or do they have enuf power to drive the lights?

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: November 24, 2005 at 9:33 PM / IP Logged

you dont need a relay on parking light. You probally need to disarm the alarm with the valet button first. Turn the key on and press the valet button. If that does not work try turning key on then pressing th valet switch once release then press and hold till the alarm disarms.

l0gik2

Member - Posts: 33

Joined: November 14, 2005

Posted: November 25, 2005 at 10:34 PM / IP Logged

Thx for the help everyone, I got the alarm programmed. Everything works perfectly. I was just not using the correct procedure to program the remote.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Python 1500 ESP

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.