Known Interference Issues?

Home / the12volt's Install Bay / Car Security and Convenience / Known Interference Issues? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

boymata

Member - Posts: 16

Joined: November 04, 2002

Location: United States

Posted: November 28, 2005 at 3:37 PM / IP Logged

Greetings everyone. I'd like to know if anyone has come across some sort of interference when trying to lock/unlock and/or remote start your car. I have a Clifford RSIII. I have posted a similar message, and by the way thank you for your replies guys, but it hasnt solved my issue. Do I need to replace the antenna with the ones that came with the RS Matrix 3.5? Can Wi-Fi or other car alarm systems know to jam DEI systems? Radar jammers? Thank to all for taking the time.

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: November 28, 2005 at 4:21 PM / IP Logged

well obviously anything running full stream on the exact same frequecy will cause an RF blanket if you are in the same proximity... does it work fine at one location but not at another? consistently?

i have also see issues with the vehicle generating a blanket while running, but work fine when not running.... fixing a problem like that is pretty much trial and error....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

boymata

Member - Posts: 16

Joined: November 04, 2002

Location: United States

Posted: November 29, 2005 at 10:37 AM / IP Logged

It does work in one location but not another. an example, system does not work in the parking lot of our complex but it works when we go to the mall or other shopping areas. It also failed when we were out in the country. I'm still a novice but can you explain the term

'blanket"? is there anything i can do to remedy this? Thank you kevin.

Back to Top

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: November 29, 2005 at 12:31 PM / IP Logged

i just refer to this rf "shield" as an RF blanket.... there could be another device at that same location already broadcasting full stream ( as opposed to busrting like your starter remote does)... this will occupy that frequency and not allow your remote to work.... Wireless TV antennas, etc can cause this problem.... or a locked starter antenna.....

if it also failed out in the country i would suspect a bum antenna or antenna cable......

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Known Interference Issues?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.