2006 f350 powerstroke, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2006 f350 powerstroke, remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

drbill

Member - Posts: 3

Joined: December 01, 2005

Location: United States

Posted: December 02, 2005 at 8:40 PM / IP Logged

need help installing a viper 791xv. what is best way to wire wait to start input into remote start? Also need sorce forfactory wireing.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 02, 2005 at 9:37 PM / IP Logged

http://www.directechs.com/directwire/wire_body.asp?action=select&yr=6112&product=Remote%20Start

Wait to start is in the glow plug relay pack on the pass. side underhood firewall. GREEN / WHITE POS(+) while glow plugs are warming. Its a small silver amplifier looking box with 2 or 3 plugs in it.....look in the green plug

Back to Top

drbill

Member - Posts: 3

Joined: December 01, 2005

Location: United States

Posted: December 07, 2005 at 9:56 PM / IP Logged

Wait to start connection. Connected it with relay to green and white wire in green plug at the relay on side of motor. this wire shows voltage for much longer than light stays on. Truck attempts to start but wont when voltage goes to 0. Seems to wait to long. Any other suggestions for triger wire for wait to start. thanks

Back to Top

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 07, 2005 at 10:39 PM / IP Logged

If you can set the "wait to start" for AT LEAST 30 seconds.......do that!

The 06 is WAY different from the 05.....

Back to Top

drbill

Member - Posts: 3

Joined: December 01, 2005

Location: United States

Posted: December 07, 2005 at 10:57 PM / IP Logged

i am using viper 791xv. no way to delay start. The green white wire you told me about is 12v + while the glow plugs are on, but it stays on even after I start with the key after the light on dash goes out. I would rather not use a timmer. is their a way to conect it to the dash bulb?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 f350 powerstroke, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.