'00 CRV remote start - 1st install

Home / the12volt's Install Bay / Car Security and Convenience / '00 CRV remote start - 1st install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mlrtimev6

Member - Posts: 8

Joined: October 10, 2005

Posted: December 02, 2005 at 10:57 PM / IP Logged

This weekend I'll be installing an Omega R&D Excalibur Gold (EG-1800 atv) with remote start into my 2000 Honda CRV automatic. I've gotten the wiring diagram from the best car site ever> https://www.the12volt.com/installbay/detail.asp?info=alarm&year=2000&make=Honda&model=CR-V&ID=17980&type=Alarm and was wondering if anyone could double check my connections or comment on any relays needed? The pinouts on the brain are as follows.

1) Ignition 1

2) Ignition 2

3) Starter +

4) +12v

5) Lights I/0

6) Lights I/0

7) Lights +

8) Siren/Horn -

9) Door +

10) Trigger -

11) Door -

12) #3 Channel -

13) Neutral Safety -

14) Brake +

15) Starter -

16) Trunk -

So there it is... which brain wire should go to which color OEM wire? There is also a molex plug on the side of the brain with (Ignition #1, +12v, Starter -) I don't have the wiring with me and can't remember if I have this plug and therefore don't know if it's optional, but I THINK this is the tach monitor for the remote start???

redpeppers

Silver - Posts: 483

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 24, 2005

Location: United States

Posted: December 03, 2005 at 12:36 AM / IP Logged

i would put the igntion 2 to the accessory wire which is a yellow wire at the igntion harness. i would also just ground the neutrel saftey wire....

Where theres is a wire there's a way.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'00 CRV remote start - 1st install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.