03 Ranger and ProStart 3400

Home / the12volt's Install Bay / Car Security and Convenience / 03 Ranger and ProStart 3400 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hxman

Member - Posts: 1

Joined: December 03, 2005

Posted: December 04, 2005 at 11:52 PM / IP Logged

Just finished installing a ProStart 3400-TW and TB-350 Bypass Kit. I followed the instructions from their website and specific docs for the 03 Ranger but can't seem to flash the hood pin and program the remote.

http://www.engines911.com/asdocs/CT-3400TW_ig_en_h310s320v250_040908.pdf

The problem is the lights stay on when trying to program........ The lights will not stay on for the 20 seconds...... I have checked the wiring, looks ok..... Any ideas would be good.

Thanks

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: December 05, 2005 at 9:51 AM / IP Logged

You may want to try unhooking the brain, and plugging it back in and see it that works.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 Ranger and ProStart 3400

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.