the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

thor remote start wiring?


Post ReplyPost New Topic
< Prev Topic Next Topic >
hondacivic 
Member - Posts: 7
Member spacespace
Joined: May 18, 2003
Posted: December 07, 2005 at 9:30 PM / IP Logged  
Hello I Am having a problem with the yellow/black wire I don’t know where to connect it to the instructions says
“Thin yellow/black wire: it sense wire for success of starting it’s connected to sense wire of electrical machine. How to find it out? It’s in the orifice of wires output of cars electrical machine, which is in the engine room. First place the transmission gear in neutral position, and turn key to “NO”. Second, check out the negative wire (3-4v output), and start the car then check again if this wire will turn to the output is 12V DC. It’s right. Please connect it to the thin yellow/black wire.”
Would I be connecting it to the accessory wire? the car is a 1989 cavalier z24
infinkc 
Copper - Posts: 438
Copper spacespace
Joined: October 28, 2002
Location: United States
Posted: December 07, 2005 at 9:45 PM / IP Logged  
wow another thor alarm horror story, sounds like they want a tach wire, but the readings dont seem right
There are 10 types of people in the world, ones that understand binary and ones that dont.
hondacivic 
Member - Posts: 7
Member spacespace
Joined: May 18, 2003
Posted: December 07, 2005 at 10:22 PM / IP Logged  
this is not a "horror story" its just a question if they put more time into the manual these alarms would be good
dualsport 
Silver - Posts: 983
Silver spacespace
Joined: September 27, 2005
Location: United States
Posted: December 07, 2005 at 10:52 PM / IP Logged  
The horror is the way those instructions were written, if that's exactly how they were given- pretty cryptic and funny at the same time!
engine room? electrical machine? on a motorcycle? eh? thor remote start wiring? -- posted image.
dualsport 
Silver - Posts: 983
Silver spacespace
Joined: September 27, 2005
Location: United States
Posted: December 07, 2005 at 10:54 PM / IP Logged  
Actually, is this maybe an Altavista translation from another language? It has all the characteristics of their computer generated translations..
hondacivic 
Member - Posts: 7
Member spacespace
Joined: May 18, 2003
Posted: December 08, 2005 at 10:57 AM / IP Logged  
does no one want to help is the tach wire close to the shock tower i found a block that goes into the car
hondacivic 
Member - Posts: 7
Member spacespace
Joined: May 18, 2003
Posted: December 08, 2005 at 2:33 PM / IP Logged  
i put it to the tach wire right off the ecu, it will remote start as before but will keep trying to start it again HELP!!!!!!!!!!!
dualsport 
Silver - Posts: 983
Silver spacespace
Joined: September 27, 2005
Location: United States
Posted: December 08, 2005 at 3:28 PM / IP Logged  
Do the instructions say anything about any kind of learning procedure for the tach input? The Scytek I have needed an initial setup to sample the input frequency when the engine's running at idle to determine the correct threshold to use when remote starting.
If you can check the tach input signal you're using, maybe it only has a 5V amplitude, and that Thor unit might need a larger swing to sense, like 12V. Any fuel injector signals you could access to try out?
Just speculating, don't know any specifics about the Thor.
hondacivic 
Member - Posts: 7
Member spacespace
Joined: May 18, 2003
Posted: December 08, 2005 at 7:51 PM / IP Logged  
no it doesnt

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 16, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer