Clifford alarm problem

Home / the12volt's Install Bay / Car Security and Convenience / Clifford alarm problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

too_funny

Member - Posts: 2

Joined: December 10, 2005

Posted: December 10, 2005 at 7:21 PM / IP Logged

Clifford Model 10 alarm, recently bought from Fry's electronics.

Car: 2000 Honda Prelude, factory prewired for an alarm.

I have everything working except for the doors. I can't get them to lock and unlock.

Here is what the alarm door lock harness look like:

Violet: unlock #87 normally open (input)

Blue/Black: unlock #30 common (output)

BROWN / Black: unlock #87a normally closed

Violet/Black: lock #30 normally open (input)

GREEN/ Black: lock #30 common (output)

WHITE/ Black: lock #87a normally closed

BLACK/ White: domelight supervision relay input #87

I am tapping these wires here:

Arm (key)

20ga. RED / White (-) at factory alarm harness located above foot pedals (should also lock doors)

Disarm (key)

20ga. GREEN/ Orange (-) at same (should also unlock doors)

These instructions were found on this website and was very helpful so far, except now I am stuck on this part of the install.

I have try out the different lock/unlock wires on the alarm but nothing happens when I push the lock/unlock button. I am out of ideas, am I missing something?

Any help would be great. Thanks.

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: December 10, 2005 at 11:12 PM / IP Logged

Violet: unlock #87 normally open (input) - goes to ground

Blue/Black: unlock #30 common (output) - goes to the GREEN/ orange in the car

BROWN / Black: unlock #87a normally closed - don't need it

Violet/Black: lock #30 normally open (input) - goes to ground

GREEN/ Black: lock #30 common (output) - goes to the RED / white wire in the car

WHITE/ Black: lock #87a normally closed - don't need it

BLACK/ White: domelight supervision relay input #87 - if you're doing domelight supervison hook this up to ground other wise don't need it

Cause I'm So white and nerdy...

First Class Certi-fried installer

too_funny

Member - Posts: 2

Joined: December 10, 2005

Posted: December 11, 2005 at 2:50 AM / IP Logged

Thanks man, I really appreciate your help. Clifford alarm problem -- posted image. I didn't know I needed to ground the violet wires.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford alarm problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.