2004 Sable, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2004 Sable, remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mobilecustoms

Silver - Posts: 397

Joined: November 04, 2005

Posted: December 26, 2005 at 9:47 PM / IP Logged

I am installing a remote start dei 561r in a 2004 sable tomorrow. I have a 556u key bypass and have a question. Blue- status output, black- ground red- 12 volt is this constant or ignition?

Also for a anti grind. How do i wire this up if the 556u is on the status output wire of the remote starter? The anti grind relay also uses this wire?

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 27, 2005 at 1:06 AM / IP Logged

Wire the 12V, to constant...for the bypass. The anti-grind has NOTHING to do with the bypass.

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 27, 2005 at 6:29 AM / IP Logged

An antigrind relay can share the status wire, just tee off....

Mike M2

Tech Manager

CS Dealer Services

Back to Top

mobilecustoms

Silver - Posts: 397

Joined: November 04, 2005

Posted: December 27, 2005 at 8:30 AM / IP Logged

i am putting one in a 2004 mercury sable ls

black- ground

blue- status output

red?- does this go to ignition or constant 12volts?

Back to Top

mobilecustoms

Silver - Posts: 397

Joined: November 04, 2005

Posted: January 03, 2006 at 9:36 PM / IP Logged

i installed a 561r remote start in a 04 sable ls mercury and the doors fall asleep when left alone for a while. I read that you can pulse the door trigger for the driver door, yellow/black while thge unlock wire at the same time, diode isolate. Is this true? Which way does the diode go, the stripe? This is my first time for a diode in a car.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 Sable, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.