98 Ford Explorer Remote Start Problem

Home / the12volt's Install Bay / Car Security and Convenience / 98 Ford Explorer Remote Start Problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nnegrini

Member - Posts: 2

Joined: December 22, 2005

Location: United States

Posted: December 31, 2005 at 4:32 PM / IP Logged

I am putting a Avistart 4400 in a 98 Explorer. I have everything hooked up and the remote start just cranks (it never fires). It has the 555f installed, to I not have it learned correctly. Any ideas?? I am assuming it is the 555f, could it have something to do with the Factory Alarm??

Thanks

catalin capota

Copper - Posts: 74

Joined: December 28, 2005

Location: British Columbia, Canada

Posted: December 31, 2005 at 4:35 PM / IP Logged

Lights turning on in the dash? Could be an ignition problem?

Search for other posts by catalin capota

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 31, 2005 at 5:28 PM / IP Logged

Check the location of the "pellet" on the key cylinder. ALSO...will it start with the key in the ignition? The 555f is just the ignition imobilizer bypass, has nothing to do with the factory security.

nnegrini

Member - Posts: 2

Joined: December 22, 2005

Location: United States

Posted: December 31, 2005 at 7:25 PM / IP Logged

It starts fine with the key in the ingition, I have to work on the 555f any suggestions on programing tricks?? Thanks in advance

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 Ford Explorer Remote Start Problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.