aerostar door locks

you need a couple of relays,  run fused 12 volt constant to terminals 87   and   85  on the realays. then on the first relay run the green wire from alarm to terminal   86.  the blue wire from alarm(lock and unlock blue and green is what im referring to) will go to terminal   86 on the second relay.   then on the first relay(with green wire) run a wire from terminal   87a   and   30   to the vehicle lock wire. cut the lock wire,   87a   goes to the lock switch side of the cut wire, and 30 goes to the other part of the cut wire.   now,  cut the unlock wire and   on the second relay(with blue wire)  run    87a  to the switch side of the wire, and   30  to the other part of the wire.   i hope that helpsjmacf14