2002 Ford Explorer Immobilizer wiring

Home / the12volt's Install Bay / Car Security and Convenience / 2002 Ford Explorer Immobilizer wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

uniquenigga

Member - Posts: 3

Joined: January 17, 2006

Location: United States

Posted: January 17, 2006 at 9:17 PM / IP Logged

Trying to put in a Directed 555P Interface Module for a 2002 Ford Explorer PATS System. Does anyone have a wiring diagram or know the wiring colors of the immobilizer data tap, immobilizer sync tap? Also where are they located at in this vehicle? Any help will be greatly appreciated. Thanks.

-J

uniquenigga

Member - Posts: 3

Joined: January 17, 2006

Location: United States

Posted: January 17, 2006 at 10:21 PM / IP Logged

bump

redpeppers

Silver - Posts: 483

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 24, 2005

Location: United States

Posted: January 17, 2006 at 10:39 PM / IP Logged

r u sure u can use the 555p on that year? My info from directechs says it takes a 556sw.....and u dont interface into the wires.....u just run the capsule up around the ant ring....in 2001 instead of using the PATS they converted to the SecuriLock

Where theres is a wire there's a way.

uniquenigga

Member - Posts: 3

Joined: January 17, 2006

Location: United States

Posted: January 18, 2006 at 5:26 AM / IP Logged

I was told by the seller of the piece that I could, but I guess I got screwed. Is there any way possible to use it? The car will start if the key is next to the ignition so I know there is a chip inside the key. Thanks for all of the help.

-J

redpeppers

Silver - Posts: 483

Joined: May 24, 2005

Location: United States

Posted: January 18, 2006 at 1:44 PM / IP Logged

take it back and trade it for the 556sw

Where theres is a wire there's a way.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 Ford Explorer Immobilizer wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.