06 silverado clutch bypass

Home / the12volt's Install Bay / Car Security and Convenience / 06 silverado clutch bypass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

slammed97mini

Member - Posts: 5

Joined: November 10, 2004

Location: United States

Posted: January 28, 2006 at 10:41 PM / IP Logged

does anyone know anything about bypassing the clutch in an 06 silverado. its kinda different. there is a box with a spring on the shaft that goes through the firewall to the clutch master cylinder and it has 6 wires in it.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 29, 2006 at 9:29 AM / IP Logged

Test the wires to see which one changes polarity when you depress the clutch and start the truck. See if it goes to ground or 12 volts and tag this wire with the appropriate polarity when remote starting.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: January 29, 2006 at 11:46 AM / IP Logged

The dark green wire at the clutch switch requires a positive pulse to allow the engine to crank. You must still power the yellow starter wire too. You need a relay to isolate these two wires.

sparky

slammed97mini

Member - Posts: 5

Joined: November 10, 2004

Location: United States

Posted: January 30, 2006 at 3:29 PM / IP Logged

hey sparkie is there anything else i need to do othere than power this wire during remote start.

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: January 30, 2006 at 7:16 PM / IP Logged

Other than the clutch bypass and the starter motor wire, I don't believe there is anything else needed to get it to start. I haven't done one myself, but I have that info listed for them.

sparky

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 silverado clutch bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.