remote start on mazda 6

Home / the12volt's Install Bay / Car Security and Convenience / remote start on mazda 6 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

boosting 6

Member - Posts: 5

Joined: January 31, 2006

Location: United States

Posted: February 06, 2006 at 8:59 PM / IP Logged

how can i do a remote start on a mazda 6. with out it starting when it's in gear. what wire do i need to use and what wire do i connect it to on a g5 clifford

Back to Top

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: February 06, 2006 at 9:52 PM / IP Logged

I hear they are making alarms that are capable with manual transmission vehicles.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 07, 2006 at 11:27 PM / IP Logged

Your G5 clifford Is NOT for a manual trans.....be safe.....get one that is!!

AST, Compustar, Astroflex.......

Back to Top

redpeppers

Silver - Posts: 483

Joined: May 24, 2005

Location: United States

Posted: February 08, 2006 at 12:17 AM / IP Logged

a safe way to do a remote start with that system is .....if your trans. has a wire coming out of it that goes to ground only when the trans. is in neatrul.

Where theres is a wire there's a way.

Back to Top

jacqueslacombe

Copper - Posts: 124

Joined: December 04, 2005

Location: Canada

Posted: February 08, 2006 at 4:33 AM / IP Logged

HI ! for info all NISSAN and MAZDA car (not made by FORD ) has a neutral sw in the manual transmission so when I do a rs on those vehicule I use a 2 relais system and a LED for the safety (1 relais is hook up to the neutral sw with the LED to cut the starter feed from the rs if the car is in gear and the LED give me the status of the neutral sw ( use a 12 volt flashing led ) so the car in neutral the LED flashe Car in gear LED no flashe For the other relais I use the parking brake wire (if the park brake is not ON this will cut the ignition to the no.1 relais so even if the car is in neutral you need the parking brake ON the remote start the car . ( With this system use automatic rs no need reserved mode and door trigger and find it safer than rs for manual gear . I use MITTCHEL's ELECTRICAL WIRING manuals for the neutral sw wire color.( BUT if it's your first time let it to the pro)(need diode for the LED cut neutral sw wire attach (-) side of diode to neutral sw side (+) to ECM (engine control module) side ( the LED (-)side to the diode (-) side and the (+) LED side to BAT (+) so when sw in neutral LED on (if you need a diagram jlacombe649@hotmail.com ) gone to CUBA from 9 to 17 feb (GOOD LOCK )

cocolaboy

Back to Top

Search for other posts by jacqueslacombe

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start on mazda 6

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.