Viper 350hv with 791 antenna

has anyone over heard of putting the 791 antenna on a 350 viper alarm to have use of the two-way pager remote?

   Its a mith. It wont work. The best trick is to swap the single button cell battery for 2 thiner same diameter batteries with the same voltage each as the single is. You will have to pick the batteries out by looking at the size. The 2 needs to be the same size as the original single. This will add as much as 60% more to the transmitters old range was.

Not a myth..... it is "responder ready".... change antenna and antenna wire, program responder remote, done. Remember, the only difference between a 350HV and a 690XV is just that, the antenna and remote. Gus Wherever I go, that is where I end up......

okay... but one more question (dumb probly)  will my original 350 remote still work?  can i program it to the 791 antenna?

no it will not work only responder 2 way lcd and the companion remote

If you use the 5000's antenna then yes, the 473V that comes with the 350HV will work. Gus Wherever I go, that is where I end up......