alarm to trunk light?

Home / the12volt's Install Bay / Car Security and Convenience / alarm to trunk light? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shinta86

Member - Posts: 7

Joined: February 08, 2006

Posted: February 15, 2006 at 3:39 PM / IP Logged

I have a 1st gen Neon with a Python 460hp. I know that I use the blue wire from the alarm but what wire do I connect it to? Thanks in advance.

Back to Top

kohara73

Copper - Posts: 192

Joined: December 08, 2005

Location: Canada

Posted: February 15, 2006 at 4:48 PM / IP Logged

Grey/Black at trunk light (-) trigger

Keith

Back to Top

shinta86

Member - Posts: 7

Joined: February 08, 2006

Posted: February 15, 2006 at 4:49 PM / IP Logged

OK, I connected the blue wire from the alarm to the grey/black wire that runs to the trunk latch but when I turn my alarm on it is telling me that zone 1 is active. If I touch the wires together when the alarm is on then the siren goes off. The whole time my trunk is completely closed.

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: February 15, 2006 at 5:04 PM / IP Logged

is your trunk light working as it should

Why oh Why didn't i take the blue pill

Darren Power

Back to Top

shinta86

Member - Posts: 7

Joined: February 08, 2006

Posted: February 15, 2006 at 5:05 PM / IP Logged

It comes on when you open the trunk and goes off when you close the trunk. If that is what you mean.

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: February 15, 2006 at 5:20 PM / IP Logged

whats the other wire going to the light it should be +12V. retest your grey/black for neg current with a DMM with door both open and closed should show positive when closed and neg when open

Why oh Why didn't i take the blue pill

Darren Power

Back to Top

dea,can

Copper - Posts: 284

Joined: January 12, 2006

Location: Saskatchewan, Canada

Posted: February 16, 2006 at 3:00 AM / IP Logged

95-99 trunk trigger gray/black wire them both into the door tigger out put on the alarm u going to have to use 1amp diodes with the band facing the switch. 2 diodes needed for this.

dragon

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm to trunk light?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.