the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

98 villager keyless entry\antitheft


Post ReplyPost New Topic
< Prev Topic Next Topic >
rhinestone23200 
Member - Posts: 4
Member spacespace
Joined: February 18, 2006
Posted: February 18, 2006 at 8:35 PM / IP Logged  

I need advice on what to check on a 98 merc villager when the keyless entry\antitheft system will not work at all.

cntrylvr79 
Silver - Posts: 582
Silver spacespace
Joined: July 02, 2005
Location: United States
Posted: February 18, 2006 at 8:46 PM / IP Logged  
First things first, gotta check the simple things.  Fuses good? battery in transmitter good?  Do the power lock switches work properly?  Has anything at all be done to the vehicle recently?
Cause I'm So white and nerdy...
First Class Certi-fried installer
rhinestone23200 
Member - Posts: 4
Member spacespace
Joined: February 18, 2006
Posted: February 18, 2006 at 8:50 PM / IP Logged  
It is a new transmitter,with batteries,door locks work fine,only fuse i could find was labeled as sec and it was fine. when i try to program nothing happens
cntrylvr79 
Silver - Posts: 582
Silver spacespace
Joined: July 02, 2005
Location: United States
Posted: February 18, 2006 at 8:55 PM / IP Logged  
Is it a factory system or aftermarket?
Cause I'm So white and nerdy...
First Class Certi-fried installer
rhinestone23200 
Member - Posts: 4
Member spacespace
Joined: February 18, 2006
Posted: February 18, 2006 at 8:58 PM / IP Logged  
it is factory. id like to figure this out  without paying a ford dealership ive already done that on another matter and it was something simple
rhinestone23200 
Member - Posts: 4
Member spacespace
Joined: February 18, 2006
Posted: February 19, 2006 at 9:36 PM / IP Logged  

Well i figured out the keyless entry,It wouldnt program due to the fact that the ignition lock cylinder housing had been busted at one time and not fixed right.The little switch attached to it wasnt being pushed when the key was inserted.   now that part is fixed i still cant get the factory antitheft system to arm,any advice would be helpful


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer