2003 chevy suburban, remote start

Hi guys, the info I have for this rig says that the (+) park light wire is brown and located in the harness in the drivers kick panel. problem is there are two brown wires there in two differant harnesses. does any one have any more info on this? or at least a good test procedure with my dmm?thanks for the help.jmacf14

I tried to help another installer find positive parking lights in one of those, and as I recall, we had a hard time and eventually gave up. I would imagine you should be able to find the wire at the back of the radio, though. What are you installing? Any reason you can't use the negative parking light wire? Because that's easy to find-----gray/black at the BCM below the steering column.

Two wires one is illumination off the dimmer the other should link directly to the park lightsWOW Sight and Sound

Maroochydore

Nothing is impossible!

Do it right the first time or don't do it at all.

Hi Chris, thanks for the reply. I am using an ultra start unit, and after reading your post, I double checked the features, and I can program the alarm for neg. park lights.(it is set up for pos. from factory. Thanks for the suggestion.jmacf14

You can find the parking lights, brakes, and a buch of other useful wires in the junction box to the left of the brake. The PL and brakes go to a plug that the trailer harness would plug into if equiped. I have seen installers put small female disconnects on the pins coming out of the box, but I usually just pull the box , flip it around, and tag the wires on the back side. PL is brown, brakes are light blue. Both are going to the same plug, on the top side of the box.Northstart.....or start it your damn self.

Hi guys, I just succesfully installed my ultrastart r/s alarm in my 2003 suburban, with a gmdlbp module. everything works great except when the alarm is triggered by opening the door, both oem and ultrastart alarms go off, and I can only shut off the ultrastart with remote. then I have to use oem remote to shut off oem alarm. I dont want to have to carry both remotes for this. how can I shut off with aftermarket remote?jmacf14

good to know. I know exactly the box that you are talking about!jmacf14

ok, now i also have one other issue. when I arm the alarm, and the domelights finally go off it sets off the alarm.any way to fix this problem?any help would be apreciated. thanksjmacf14